Replacement Rubber Tracks, Steel Tracks, Sprockets, Rollers, Idlers, and Skid-Steer Over-The-Tire Tracks!
Menu
Get a Quote
 

*** Mini Excavator Track Tread Pattern Information ***

These images are provided to assist your track specialist explain the options to you on the phone so feel free to call with your questions. Tread pattern pictures are for reference only. If your tread pattern must match, please verify when ordering which tread you require.Below are some of the most common tread patterns.

Rubber Track Tread Patterns by Machine Type:

FULL SIZE MINI EXCAVATOR TREAD PATTERNS


Yanmar Mini Excavator Rubber Track Tread Pattern

Yanmar Off-Set Tread Patterns


Offset Yanmar Compatible Staggered Block Tread Pattern

This is the off-set tread pattern option for Yanmar manufacturing mini excavators. There is an alternate tread pattern option available.
Tracks that would use this tread pattern include:

  • Mustang 800z
  • Yanmar VIO 70 Series
  • Yanmar VIO 75 Series
  • Yanmar VIO 75-3
  • Yanmar VIO 75-5
  • Yanmar VIO 80


Kobelco Mini Excavator Rubber Track Tread Pattern

Kobelco Mini Excavator Tread Patterns


OEM Case Kobelco Mini Excavator Tread Pattern

This is the original Case/Kobelco type tread pattern and dedicated guiding system specific to your Case and Kobelco excavators.
Tracks that would use this tread pattern include:

  • Kobelco 55SRX
  • Kobelco SK042
  • Kobelco SK045 Series
  • Kobelco SK 45 Series
  • Kobelco SK050
  • Kobelco SK 50
  • Case CX 55B


Kubota Mini Excavator Rubber Track Tread Pattern

Kubota Mini Excavators


Kubota-Specific Tread Pattern and Guide System

This is the most common tread pattern for the dedicated Kubota guiding system on the KX 161-3 and U55-4 series excavators.
Tracks that would use this tread pattern include:

  • Kubota KX161-3
  • Kubota KX057-4
  • Kubota U55-4
  • Kubota U45-3

Bobcat Mini Excavator Rubber Track Tread Pattern

Interchangeable Tread Patterns


Standard Directional Tread Mini Excavator Tread Pattern

We typically stock a directional and a block type option for the sixteen inch wide mini excavator tracks. Tracks that would use this tread pattern include:

400x72.5 wide guide

Interchangeable Guide Types

This is the wide guide type rubber track for the 400x72.5 sizes. The guide width is four and a quarter inches wide across the outside of the guiding system which is about a quarter inch wider than the narrow guiding system for the same 400x72.5 size range mentioned below. This guide system is determined by your roller type and they are not interchangeable among all models.


400x72.5x74 Rubber Track Loader Tread Pattern

This is an off-set directional tread pattern option for many of the larger excavator models. Tracks that would use this narrow guide track tread pattern include:

  • Gehl 602
  • Takeuchi TB245
  • Yanmar B-5
  • Yanmar B-50
  • Case CX 47
400x72.5 Narrow Guide

The narrow guiding system reference relates to the width of the guide channel down the center of the track where the rollers and sprockets connect with the track. Since there are different roller types on different models the width of this guide can vary from model to model. The yellow line in the picture to the left indicates this guide system is the narrow type compared to the 400x72.5 wide guide type in the pictures above. The narrow guide track measures four inches across from the outside of the guide. It is an inch and three quarters across from the inside of the guide.


Komatsu Rubber Track Loader Tread Pattern

Komatsu Mini Excavators


Komatsu Specific Tread and Guide

This tread pattern is specific to the Komatsu guiding system which was also known for use on some Takeuchi models that shared the same undercarriage design. Tracks that would use this "19Y" track tread pattern include:

SMALLER MINI EXCAVATOR TREAD PATTERNS

Bobcat 2 Ton Mini Ex Tread Patterns

Tread Patterns for 2-Ton Mini Excavators

Common tread pattern on 230 mm wide tracks for most 2 Ton Mini Ex:

MID-SIZED MINI EXCAVATOR TREAD PATTERNS

Bobcat Mini Excavator Wide Guide Tread Pattern

Interchangeable Cross-Brand Patterns


Wide Guide Tread Patterns for the Mid-Sized Mini Excavators

Common tread pattern on 300 mm wide guide tracks:

Wide Guide Rubber Track

The term wide guide refers to the guiding system where the sprockets and rollers interact with the track. As indicated by the yellow line in the picture, the guiding system is wider than the narrow guiding system below. In most cases we know what guide you need so just give us your make and model but in rare cases we may need you to measure this guiding system for us to verify your track size.


Bobcat E26 Excavator Tread Pattern

Most Popular Mid-Sized Mini Excavator Directional Tread Pattern

Common tread pattern to fit the following models:

250 mm Wide Kobelco IHI Tread Pattern

New Kobelco, Case/IHI Tread Patterns for 250mm Tracks

Common tread pattern to fit the following models:

  • Case CX 27B
  • Case CX 30B
  • IHI 25V-4
  • Kobelco SK 025
  • Kobelco SK 025-1
  • Kobelco SK 025-2

Kubota™ KX 121-3 Rubber Track Tread Pattern:

Kubota Track Tread KX 121-3

Kubota Mini Tread Patterns


Kubota 121-3 Specific Tread Patterns

Kubota is known for very specific guiding systems. We offer the same exact Kubota guiding system in both of our tread designs. This is not an interchangeable tread design, it is specific to the unique design of the Kubota mini excavator series. Now offering Kubota KX 121-3 rubber tracks in optional tread patterns:

Yanmar - Gehl Rubber Track Tread Pattern:

Yanmar and Gehl Tread

Yanmar Gehl Specific Mini Excavator Tread Pattern

Yanmar, Gehl, and Mustang have teamed up to bring the ultimate in track tread patterns and track guiding systems.

Yanmar™ Off-Set Tread Pattern:

Yanmar Off-Set Rubber Track Tread Pattern

Yanmar Compatible Off-Set Mini Excavator Tread Patterns

Now offering Yanmar Off-Set rubber tracks for the following machines:

Yanmar Off-Set Rubber Track Tread Pattern

Yanmar VIO 27 Specific Tread Pattern

Now offering Yanmar Off-Set original width (10") rubber tracks for the following machines:

Yanmar Off-Set Rubber Track Tread Pattern

Yanmar VIO 20 Series Tread Patterns

Now offering Yanmar Off-Set original width (10") rubber tracks for the following machines:

  • VIO 20-1
  • VIO 20-2
  • VIO 20-3


Rubbertrax, Inc. Conyers GA
Rubbertrax, Inc.
Atlanta Distribution Center
1721 Old Covington Rd. N.E.
Conyers, GA 30013 USA
Email: info@rubbertrax.com
Toll Free Phone: 866-431-5305

Social Media

  • Facebook
  • LinkedIn
  • YouTube
  • Twitter

Mailing List

Join our email list to receive updates and specials!

All manufacturers, names, symbols and descriptions are used for viewer reference needs only, and it is not implied that any parts or tracks are original products of the manufacturer. Rubbertrax, Inc. is not associated with any OEM manufacturer although many OEM dealers distribute Rubbertrax, Inc. products. Rubbertrax Inc. distributes worldwide with daily shipping to Canada, Puerto Rico and Mexico. All of the content and photos featured or displayed on this Site, are owned by Rubbertrax, Inc., unless noted otherwise.

Rubbertrax™, Inc. 2017. All Rights Reserved.